- -F bfdname
-
- --target=bfdname
-
Treat the original objfile as a file with the object
code format bfdname, and rewrite it in the same format.
- --help
-
Show a summary of the options to strip and exit.
- --info
-
Display a list showing all architectures and object formats available.
- -I bfdname
-
- --input-target=bfdname
-
Treat the original objfile as a file with the object
code format bfdname.
- -O bfdname
-
- --output-target=bfdname
-
Replace objfile with a file in the output format bfdname.
- -R sectionname
-
- --remove-section=sectionname
-
Remove any section named sectionname from the output file, in
addition to whatever sections would otherwise be removed. This
option may be given more than once. Note that using this option
inappropriately may make the output file unusable. The wildcard
character * may be given at the end of sectionname. If
so, then any section starting with sectionname will be removed.
If the first character of sectionpattern is the exclamation
point (!) then matching sections will not be removed even if an
earlier use of --remove-section on the same command line
would otherwise remove it. For example:
--remove-section=.text.* --remove-section=!.text.foo
will remove all sections matching the pattern '.text.*', but will not
remove the section '.text.foo'.
- --keep-section=sectionpattern
-
When removing sections from the output file, keep sections that match
sectionpattern.
- --remove-relocations=sectionpattern
-
Remove relocations from the output file for any section matching
sectionpattern. This option may be given more than once. Note
that using this option inappropriately may make the output file
unusable. Wildcard characters are accepted in sectionpattern.
For example:
--remove-relocations=.text.*
will remove the relocations for all sections matching the patter
'.text.*'.
If the first character of sectionpattern is the exclamation
point (!) then matching sections will not have their relocation
removed even if an earlier use of --remove-relocations on the
same command line would otherwise cause the relocations to be removed.
For example:
--remove-relocations=.text.* --remove-relocations=!.text.foo
will remove all relocations for sections matching the pattern
'.text.*', but will not remove relocations for the section
'.text.foo'.
- -s
-
- --strip-all
-
Remove all symbols.
- -g
-
- -S
-
- -d
-
- --strip-debug
-
Remove debugging symbols only.
- --strip-dwo
-
Remove the contents of all DWARF .dwo sections, leaving the
remaining debugging sections and all symbols intact.
See the description of this option in the objcopy section
for more information.
- --strip-unneeded
-
Remove all symbols that are not needed for relocation processing.
- -K symbolname
-
- --keep-symbol=symbolname
-
When stripping symbols, keep symbol symbolname even if it would
normally be stripped. This option may be given more than once.
- -M
-
- --merge-notes
-
- --no-merge-notes
-
For ELF files, attempt (or do not attempt) to reduce the size of any
SHT_NOTE type sections by removing duplicate notes. The default is to
attempt this reduction unless stripping debug or DWO information.
- -N symbolname
-
- --strip-symbol=symbolname
-
Remove symbol symbolname from the source file. This option may be
given more than once, and may be combined with strip options other than
-K.
- -o file
-
Put the stripped output in file, rather than replacing the
existing file. When this argument is used, only one objfile
argument may be specified.
- -p
-
- --preserve-dates
-
Preserve the access and modification dates of the file.
- -D
-
- --enable-deterministic-archives
-
Operate in deterministic mode. When copying archive members
and writing the archive index, use zero for UIDs, GIDs, timestamps,
and use consistent file modes for all files.
If binutils was configured with
--enable-deterministic-archives, then this mode is on by default.
It can be disabled with the -U option, below.
- -U
-
- --disable-deterministic-archives
-
Do not operate in deterministic mode. This is the
inverse of the -D option, above: when copying archive members
and writing the archive index, use their actual UID, GID, timestamp,
and file mode values.
This is the default unless binutils was configured with
--enable-deterministic-archives.
- -w
-
- --wildcard
-
Permit regular expressions in symbolnames used in other command
line options. The question mark (?), asterisk (*), backslash (\) and
square brackets ([]) operators can be used anywhere in the symbol
name. If the first character of the symbol name is the exclamation
point (!) then the sense of the switch is reversed for that symbol.
For example:
-w -K !foo -K fo*
would cause strip to only keep symbols that start with the letters
``fo'', but to discard the symbol ``foo''.
- -x
-
- --discard-all
-
Remove non-global symbols.
- -X
-
- --discard-locals
-
Remove compiler-generated local symbols.
(These usually start with L or ..)
- --keep-file-symbols
-
When stripping a file, perhaps with --strip-debug or
--strip-unneeded, retain any symbols specifying source file names,
which would otherwise get stripped.
- --only-keep-debug
-
Strip a file, emptying the contents of any sections that would not be
stripped by --strip-debug and leaving the debugging sections
intact. In ELF files, this preserves all the note sections in the
output as well.
Note - the section headers of the stripped sections are preserved,
including their sizes, but the contents of the section are discarded.
The section headers are preserved so that other tools can match up the
debuginfo file with the real executable, even if that executable has
been relocated to a different address space.
The intention is that this option will be used in conjunction with
--add-gnu-debuglink to create a two part executable. One a
stripped binary which will occupy less space in RAM and in a
distribution and the second a debugging information file which is only
needed if debugging abilities are required. The suggested procedure
to create these files is as follows:
-
- 1.<Link the executable as normal. Assuming that it is called>
-
"foo" then...
- 1.<Run "objcopy --only-keep-debug foo foo.dbg" to>
-
create a file containing the debugging info.
- 1.<Run "objcopy --strip-debug foo" to create a>
-
stripped executable.
- 1.<Run "objcopy --add-gnu-debuglink=foo.dbg foo">
-
to add a link to the debugging info into the stripped executable.
-
Note---the choice of ".dbg" as an extension for the debug info
file is arbitrary. Also the "--only-keep-debug" step is
optional. You could instead do this:
- 1.<Link the executable as normal.>
-
- 1.<Copy "foo" to "foo.full">
-
- 1.<Run "strip --strip-debug foo">
-
- 1.<Run "objcopy --add-gnu-debuglink=foo.full foo">
-
-
i.e., the file pointed to by the --add-gnu-debuglink can be the
full executable. It does not have to be a file created by the
--only-keep-debug switch.
Note---this switch is only intended for use on fully linked files. It
does not make sense to use it on object files where the debugging
information may be incomplete. Besides the gnu_debuglink feature
currently only supports the presence of one filename containing
debugging information, not multiple filenames on a one-per-object-file
basis.
- -V
-
- --version
-
Show the version number for strip.
- -v
-
- --verbose
-
Verbose output: list all object files modified. In the case of
archives, strip -v lists all members of the archive.
- @file
-
Read command-line options from file. The options read are
inserted in place of the original @file option. If file
does not exist, or cannot be read, then the option will be treated
literally, and not removed.
Options in file are separated by whitespace. A whitespace
character may be included in an option by surrounding the entire
option in either single or double quotes. Any character (including a
backslash) may be included by prefixing the character to be included
with a backslash. The file may itself contain additional
@file options; any such options will be processed recursively.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
or any later version published by the Free Software Foundation;
with no Invariant Sections, with no Front-Cover Texts, and with no
Back-Cover Texts. A copy of the license is included in the
section entitled ``GNU Free Documentation License''.